The nail knife is cracked, the grade is wrong, or the supplier is cutting corners

Tag: Brazed gripper dies,  Brazed cutter, Punches

Nail making machine is the main equipment in the process of nail making. The nail rod, nail cap and nail tip are respectively completed by three parts of brazed gripper dies, brazed cutter, punches. UKO has 16 years experience in producing and exporting nail tools, and we are familiar with the production of these three parts. But a few days ago, I suddenly received a very strange complaint, customers said that our brazed gripper dies,  punches is very good, but nail knife is very wrong!

This nail manufacturer from India found us on the recommendation of UKO's old customers. He reflects that our brazed gripper dies, and punches are better than he used before. But brazed cutter always crack when they are used, just like that they bought before. At the same time, customers have sent us all the suppliers and grade information they have purchased before. Obviously, it's not the first time that they have this problem, and he thinks The problem must be in the selection of the grades.

The grade is YG20C, which is the best one after many tests on the same nail machine. In order to find out the basic reason, We excluded all possible causes with our customers. Customers are also very cooperative, and show us the installation of brazed cutter by video, so that we can rule out the damage caused by the collision of two nail knives. In the video, we suddenly found that the raw materials used by customers were welded scrap. This is the root cause!! Because the hardness of the weld is different from that of other places, when our nail cutter touches the weld, it is easy to damage or crack.

After customers use new raw materials, brazed cutter are no longer damaged without cause. In addition, we also suggest that the wire rod should be put in use after 1 to 3 months before it is put into production. It can increase the service life of tungsten carbide nail tools.

As a professional supplier of tungsten carbide products, UKO is committed to providing tailor-made tungsten carbide solutions for global customers. In terms of wire industry, besides providing nail tools, UKO also has wire drawing die, wire guide die, thread rolling planetary dies, cold rollers, descaling roll and etc. All of UKO wire tools are welcomed by customers around the world. In order to make our tungsten carbide products recognized by our customers, we have a perfect after-sales service system. We also have 337 guarantees for complaints from our customers - reply within 3 hours, formal reply within 3 days and formal solution within 7 days. At the same time, we also provide technical guidance and maintenance services. If you have purchasing plans for cemented carbide nailing tools, please feel free to contact us. We will provide you with professional tungsten carbide nail tools solutions.

Welcome to visit the website at www.ukocarbide.com and www.ukowiretools.com.

                                                  Edited by: Chelsy Chen