Tag: nail cutter, nail making tools, nail making machine
As the saying goes, if you want to do a good job, you must first sharpen your tools. In the process of making nails, the use of nail cutters is very important. However, many nail manufacturers complain that the nail cutters which they bought is not durable, the service life is very short that they have to replace it frequently, the reasons must be the nail cutter manufacturers are not professional or cheating on workmanship and materials, it may be the truth. Are there any other reasons? Let's analyze the reasons one by one.
There are four other common reasons why nail cutters for nail making machine break down quickly.
1.The hardness for raw materials of nails is too high.
Nail-making raw materials are common steel wire coil on the construction site. There are many specifications of the steel wire coil, we generally choose Q195, Q215 or Q235, their hardness is gradually increasing. If we use Q235 wire coil as the material of nails, the loss for nail cutters is certainly greater than Q195. And the harder material for wire coil we choose, the shorter the working life of the nail cutter will be. Therefore, in order to better cut the nail point we should choose the appropriate grade for nail cutter. UKO use YG20C as the grade of nail cutter, which hardness is up to 82HRA, it is suitable for the production of most nails.
2.The cutting edge of nail cutters is improper.
Some cutting edge does not meet the requirements, which should be noticed that different hardness and strength of the material is applicable to the different cutting edge. For example, for high carbon steel nails with high hardness and abrasion resistance, UKO will be equipped with appropriate grooves to meet the needs of customers. This is also a valuable experience learned from a Thailand customer. After using our nail cutters, the customer finally changed the situation of changing the nail cutters frequently and greatly improved the use time of the nail cutter, so we have cooperated till now.
3.Machine adjustment does not reach the designated position.
The clamping force is insufficient or too tight when the feeding knife or the feeding roller enters the wire. At this time, we should adjust the wire feeder to ensure reliable wire feeding and replace the worn parts of the wire feeder. After the nailing machine starts, it should wait for the machine to work properly before pulling the feed handle into the wire to make nails. When the machine stops, it should stop the feed first. The nail cutters should be kept sharp at any time. We should pay attention to the temperature change and abnormal noise of the friction parts at any time during the nail making machine operation.
4. The adjustment of nail cutters is too tight
When adjusting the nail cutter, we should not adjust the gap of the nail cutter too tightly, nor too wide, otherwise the nail point will be bent or not sharp. In addition, it will increase the loss of the nail cutter. If the distance between the two nail cutters is appropriate, even if there is a small flying edge on the nail point, it can be removed with a single stroke of the hand. At this time, a beautiful nail point can be polished after polishing, and the loss of the nail cutters will be greatly reduced.
Having known the above reasons, I hope you can think about the reasons and whether there are other possibilities when changing nail cutters frequently. Meanwhile, please feel free to contact with us. As a professional nail making tool manufacturer, we are happy to analyze the reason, solve the problem, and provide the most suitable nails making solutions to you.
Please visit the website for more details www.ukocarbide.com www.ukowiretools.com
Edited by: Ashley Chan
No comments:
Post a Comment