Tag: nail knife, nail making machine
I believe that many people in the nail industry must have encountered this situation when working, During the nail-making operation, the nail tip suddenly cracked, resulting in the production can not be carried out normally. Why is it that the nailing machine is purchased at a high price, but it is not handy?
In fact, this problem is very common. Don't panic too much about not being able to deliver the product to the customer within the delivery date. Procurement colleagues should not doubt whether their professional judgment has gone wrong. As long as you continue to read this article, you can find the problem in half an hour!
First of all, there are two major causes, one is the cause of the nail knife, the other is the cause of the nail wire.
In this case, we should stop the machine first, and then observe the nail knife to see if the nail knife is damaged, clips (the nail knife is not sharp enough, cutting constantly, leading to the nail silk lotus root broken wire connection), the center of the non-alignment (poor concentricity) and other issues; If everything is normal, it is necessary to replace the nails and temper the replaced nails again, so that the problem can be solved. Therefore, good production materials can not only determine the quality of products, but also ensure the service life of the die.
Secondly, a common case is that the nails and caps are skewed.
If such a problem is encountered, it should be checked whether the center of the two nail knives of the nail making machine is consistent with the center of the nail mould, and whether the front and back of the nail knife are regular. In addition, it is necessary to check whether the sinking holes of the two nail moulds of the nailing machine are located on the same plane and whether the shell of the nail moulds is loose. Only one-to-one correspondence can ensure the birth of high-quality nails!
Moreover, the main reason is that the thickness of nails and caps is not up to the standard.
In order to solve this problem, it is also necessary to check the clamps, mainly to check whether the two sets of clamps are the same in height, and also to confirm that the nail-making mechanical clamps can clamp the nail wire. If you want to bring a crown, you must bear its weight; if you want to be a perfect nail, you can't do it without high enough pressure resistance. That's why the so-called Phoenix Bath Fire Nirvana is reborn!
Finally, pay attention to check whether the sinking hole of the fixture has serious wear on one side. No matter how good the production machinery is, it should be cleaned up in time and maintained regularly.
Every product has its specific use, Nails are a common but indispensable part in life. According to the use of various industries, nails can be divided into many kinds. Common are nails (ordinary steel nails); floor nails for wood floor decoration; steel row nails for decoration and furniture manufacturing; clamps for car seats, wire mesh, etc. Since nails are so widely used, manufacturers will attach great importance to the machines they make. What is the working principle of a nail machine? Is it efficient? Is it convenient to operate? These problems directly affect the performance, price, cost and profit of nail machine.
If your partner is still struggling to find the right nail machine supplier, congratulations on seeing this!
UKO is a professional cemented carbide material supplier in China. It integrates production, sales and after-sales. Not only have high quality nailing products, but also have professional consultants online to answer your questions, so that your nailing process is no longer troublesome!
If necessary, please contact:
TEL:0086-731-28821507
FAX: 0086-731-28821527
E-mail：sales002@ukocarbide.com
Website：www.ukocarbide.com
www.ukowiretools.com
Edited by: Gloria
No comments:
Post a Comment