As the professional manufacture of nailing tools, UKO provides high-quality products for all the clients.During the nailing process, nail dies will encounter a various of problems, the nail skew is the most common problem. There are two general reasons: one is that nail knife is skewed or broken; the other is that the nail die on the nail machine is loose.How to solve the problem that the nail produced by the nail machine is skew? According to the above reasons, if it is the nail knife skew or the nail knife damaged, then you should check whether the nail knife is damaged and skewed, if the nail knife is skew, the nail production must be skew.
Therefore, it’s necessary to pay attention to the routine maintenance of the nail dies and the nail knife parts in the equipment.If the nail die and the nail knife part in the equipment are loose, then you should check first to confirm whether it is the problem, and adjust the nail die to the normal operating condition to avoid the nail skew.There are three general reasons that the nail tip produced by nail die is not straight or curved: the first is nail die loose; the second is that the nail blade edge does not meet the requirements; the third is improper adjustment of shear mechanism.
Poland's Complex-Partner Sp. z o.o. is a partner of the UKO’s integral alloy of nails knife and nails dies. With the stable quality supply in 2016, UKO has recognized by customers. In mid-2017, the customer feedback quality problems of nail die products, the nails produced by our nail knives and nail dies were skewed and could not meet the nail requirements in the Polish market. The customers were angry and became doubt about our manufacturing technology.
As a enterprise with 16 years of export experience, UKO has a perfect after-sales system which providing a set of procedures for handling customer questions. We ask the customer for sending the pictures of the nail knives after use, the finished product of nail, and the video of whole production process. After professional analysis by engineers, the main reason was that the nail die was loosely installed in the nail machine.
After giving the improvement plan and free new punch of nail die and nail knife for re-tested. The customer replied a mail of thanks that the nails production became normal for our professional advice, and they would recommend other nail customers in Poland for us.UKO specializes in the production of nail knives and nail dies punches, providing professional one-stop service for fastener customers, including welding nail knives, welding nail dies, welding rams, integral alloy punches, nail knife and nail die blanks, feeder, toolbar, replaceable nail dies and nail knives. The punches of nail knife and nail die provided by UKO are suitable for MORONI VITARI, KOVOPOL, WAFIOS.More products information are available on UKO’ website: www.ukocarbide.com and www.ukowiretools.com.
Edited by: Penny
yes, good job!
ReplyDelete